Issue 1:warped bed. You need to find out how badly the bed warped. Using a ruler or straight item to check the flatness of the bed and see how big th…

@schmerzlich Thanks a lot, I will deliver your message to the R&D team.

@monoxid09 check out this video

@aliyanna have you tried any other models like the XYZ cube. If this issue happens again, you may need to contact the after-sales. The stepper drivers…

There’s another option called something like “refresh the sd card”, you may need to press it to let the printer read the card.

There’s another option called something like “refresh the sd card”, you may need to press it to let the printer read the card.

This video may help.

@railchaser2020 From your description seems like the printer power cycled and the screen is frozen. 70% is the faulty mainboard, 10% faulty power swit…

Interesting phenomenon. If the model and slicing settings are ok, could you check the moving parts, like lose belt or parts?

It depends on which firmware you are flashing. A long beeping sound normally indicates the wrong firmware. You must have a reason to update the firm…

Did you pause the printer manually or by using the Pause at height function in the slicer?

From the image, it has a similar heat block to the ender printers, the nozzle should be MK8. and the Titan drive is plastic ( at least for the cover).

@markus-doderus We usually update the firmware when we add a part to the print like BL touch, or the printer has firmware bugs. If your printer is wor…

Preheat the nozzle to 190c, press the extruder clamp, and feed in the PLA a little to let the end get soften, and then pull out the filament quickly.

Not a critical problem but happens sometimes. The reason is the weak cable connection. You need to reconnect the BL touch cable and restart the prin…