@pappy-goodwill I found this one, donesn’t know if it helps:

@jmanson360 Adjust Z-limit switch? Or setting the z-offset to a negative value may help.

I’ve had the same issue on my Ender 3V2 before, and it turns out that there are some connection issue on the fan: it stops to work after a while and c…

Did you use Raft as your build plate adhesion setting in Cura? There are extra first layers are printed if you use raft. You can change to Skirt or Br…

I think the beep sounds mean that you flash the wrong firmware. If you want to get the default firmware, maybe you can go to this page and download th…

@m0nst3rgr1m I keep it on the printer, since there are multiple people using the printer, and we print it frequently. If you don’t print much, I recom…

Experience told me that it will be fine. This is a really interesting point.

@nice That really helps if people can do that when asking questions. I would need to figure out how to remain people when they ask the question. Thank…

@someusername My question is that does M913 command support Marlin? I went to this website and it says that it doesn’t support Marlin.

Is the nozzle too far from the bed? Maybe the setting on the slicers may also cause the problem. need to be careful about the nozzle or filament diame…

@revnaegir I think you may need to download the CH340 USB driver instead of other drivers. You can find the download file on this website:

@vincent-45 For me it looks like the motor is not working well. Did you fix the problem now?

@dave105 Have you tried download from this page?/p>

@tormod-hag I was wondering about the bed material and temperature. I would try printing on some blue printer tapes and see if it adheres better.