Forum


 

AJL
AJL
@ajl
Active Member
Joined: Nov 9, 2021
Last seen: Jul 9, 2022
Topics: 0 / Replies: 10
Reply
RE: Ender 3 Pro – Will not adhere to bed

@burgo855 Clean the glass bed with a nailbrush and dish washing soap before rinsing in hot water and allowing to dry. Do not touch the surface with yo…

7 months ago
Reply
RE: First few layers print good but corners come off of base

What material are you using and what bed temperature?

7 months ago
Reply
RE: Unable to print with Ender 3 Pro

@andyfraser Yes, you need to program in the Z offset which will determine the actual print height. As an example, I have -3.72mm set as my offs…

10 months ago
Reply
RE: Print not Sticking to Ender 3 v2 bed

@laxking333 The first thing to be sure of is that the bed is level. That makes a great difference. Then ensure that your bed temperature is suitabl…

10 months ago
Reply
RE: PETG creates Ghostly prints

I’m no expert but I think that your fan should be as per PLA.

12 months ago
Reply
RE: New glass bed adhesion issue

@shdwdrgn I had the same issues with the new glass, despite IPA cleaning etc, so started using 3DLAC. I had to give the glass a good scrub after usin…

12 months ago
Reply
RE: Ender V2: Why an object that’s 198 mm long and less that 35mm tall cannot fit into the 220 x 220 x 250 printing bed?

Because it needs room for the skirt to be printed. You can solve the issue by rotating the object to be diagonal on the bed of course.

1 year ago
Reply
RE: Issues Leveling the Bed

@skinnypickle It took me by surprise too, but the fix is easy… Go into MOVE and change the Z height from 13.2 or whatever it is to zero. That will…

1 year ago
Topic