My printer has not been used for several weeks and over the weekend I wanted to print a few things and I keep getting the error below when initializing a print.
"Detect the file unexpectedly stopped last time" is displayed on the screen shortly after initializing the print and reaching the operation temp. Sometimes it happens immediately, and sometimes it makes it as far as printing the purge lines down the side of the build plate before it quits and displays the error.
I have tried the following:
Power off and restart several times.
Re-formatted and re-uploaded the file to the machine.
Tried an alternate print file that previously worked.
Used a new sd card.
Re-flashed the firmware.
Updated to the most recent version of Cura.
Printer details are below:
Ender-3 V2
Model#: US1-Ender3 V2-FBA
Motherboard: 4.2.2
Purchase date from Amazon: 10/16/2020
Any help would be appreciated.
@usmc2033 Looks like it is a firmware issue, but you flashed the firmware. No clue.
Hi-
did you ever figure out what caused this? I have the same problem.
thanks,
Brian
Has there been any updates to this?? I have done all the same and my printer has been used less than 10 times. But I do have the crtouch, and dual z axis ball screw. I had to flash the firmware to use the crtouch so I am wondering if that is the issue. I installed it from creality itself so I don’t get it. Please help!!
Latest Post: Creality 3D Printer Firmware Download Guide Our newest member: npicc626 Recent Posts Unread Posts
