Forum

 

Notifications
Clear all

Ender 3 v2 Creality Logo on screen nothing else


warlock72
(@warlock72)
New Member Registered
Joined: 6 months ago
Posts: 1
Topic starter  

Hi Im on to my second Ender 3 v2 printer. First one I had nothing but problems with this one everything seemed to be working fine but now when I turn it on I get the Creality Logo no progress bar as if loading its just what you see in the picture and that's how it stays. I reinstalled the firmware but still the same. Any ideas please

Thanks


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 8 months ago
Posts: 1045
 

@warlock72  Hi bro. First, you need to check if the screen itself or cable broke.

1. Turn the display knob 15 seconds after starting the machine, if there is a "drip" prompt sound?

2. Turn off the machine. Check if the display cable damaged? If no, re-plug the display cable again and turn it back on to see if it works.

3. Check if the printer works with online printing.

If these not the issue, then you need to check firmware, if you confirm the mainboard is ok, then maybe it is the mainboard.


warlock72 liked
ReplyQuote