Forum

 

Notifications
Clear all

Blue screen and fans not working


Zatoid
(@zatoid)
New Member Registered
Joined: 3 months ago
Posts: 1
Topic starter  

Hi, I ran into an issue today while cleaning a clog on my printers nozzle, I disassembled the entire nozzle head due to a leak and as I was putting it back together the fans for the nozzle, as well as the motherboard fan stopped working, I believe the screen was still working at that time. I rebooted the machine thinking that would fix the issue but only got a blank blue screen, I checked the connections and everything was plugged still, the blue light on the motherboard still turns on so I'm not quite sure how to fix this. I can try flashing the firmware but figured since I wasn't even messing with the software I figured it wasn't that. Any help would be appreciated.


ReplyQuote