Forum

 

Notifications
Clear all

Ender3 V2 error message

   RSS

0
Topic starter

I bought an Ender3 V2 printer and have printed successfully with PLA and PLA+. Ender3 v2 is rated at <= 250oC but when i set temperature above 200oC to print to PLA+, i get an error message "Nozzle is too lowperature" and the printer freezes.

I tried to raise the temperature gradually. I started at 200oC and have gone to 205oC and a little bit more. I started printing and I might get this message again or might not. Also the temperature seems to change or lower while printing. It is not stable.

Any suggestions as to what causes this unstable behavior?