Forum

 

Notifications
Clear all

New Printer x axis issues


Stargazer200529
(@stargazer200529)
New Member Registered
Joined: 4 months ago
Posts: 2
Topic starter  

New Ender 3 V2 printer. Just finished assembly, bed leveling. The printer will "go home" fine. But I tried to run both the dog or cat files that came with thr printer and the x-axis jams against its stop, starts vibrating and then the printer just freezes.


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 7 months ago
Posts: 1045
 

@stargazer200529 Could you please do a wiring change test to find if the X motor is something wrong or the mainboard is something wrong. Attached video for your reference.


ReplyQuote
Stargazer200529
(@stargazer200529)
New Member Registered
Joined: 4 months ago
Posts: 2
Topic starter  

I swapped both wires on the motor and motherboard. It moves both times. I don't have a multimeter to check the voltages. 


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 7 months ago
Posts: 1045
 

@stargazer200529 Do you mean that you swapped both wires on the motor and motherboard. But the X-motor moves well both times? but it can not move correctly when printing something?


ReplyQuote