Forum

 

Notifications
Clear all

broke my 0.4 buse in the hotend while trying to change it


Alkyon
(@alkyon)
New Member Registered
Joined: 8 months ago
Posts: 2
Topic starter  

I have a Ender 3 V2, i tried to change my 0,4 buse (while the head was hot) but it broke inside.

What can i do to repair ?

Thanks for your help


ReplyQuote
csosz.imre
(@csosz-imre)
New Member Registered
Joined: 8 months ago
Posts: 4
 

@alkyon

If I understand correctly, Nozzle broke into the Heating Block. So you need to replace the Heating Block and also buy a new Nozzle. Do you have a picture of it?

Link: Creality 3D® 20*20*10 Aluminum Hot End Heating Block For Ender-3 3D Printer

Best regards,
Imre Csősz


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 10 months ago
Posts: 1045
 

@alkyon  There is no way to get it out if the screw thread of the nozzle broke into the heating block. You need to change the whole heating block.


ReplyQuote
Alkyon
(@alkyon)
New Member Registered
Joined: 8 months ago
Posts: 2
Topic starter  

Thanks to both of you.

I found the necessary part and my Ender is working again 🙂

Sorry for the french word "buse" the correct word was nozzle (was in a panic that day).


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 10 months ago
Posts: 1045
 

@alkyon LOL ?  Guess you have already calmed down as your printer is working again. Never mind. A word does not affect the reading.


ReplyQuote