Notifications
Clear all

SFS and A number of issues


AnthonyEnder
Posts: 16
Registered
Topic starter
(@anthonyender)
Heating Block
Joined: 2 months ago

I used the firmware builder to create

The BTT Smart Filament sensor is not triggering when printing from both the SD card or Octoprint. Watching Terminal confirms no commands related to the filament sensor and also showed some strange behaviour of the firmware. When printing from the SD and deciding to cancel the print (due to not seeing any filament sensor triggering an expected filament change movement) once cancel is confirmed on-screen, it returns to the main menu however the machine sounds a beep as if I was pausing and starts asking for a resume in terminal.

I am receiving conflicting information on how exactly to get the SFS working on anything but specifically both when printing from SD and Octoprint. Where I would think Octoprint should be able to see the printer was paused after the sensor (being connected to the printers pre-set port).

What am I getting wrong here? Logs are below.

 

SD CARD PRINT

Recv: T:209.37 /215.00 B:60.00 /60.00 @:127 B@:33
Recv: T:210.00 /215.00 B:60.00 /60.00 @:127 B@:33 W:?
Recv: T:211.25 /215.00 B:60.00 /60.00 @:127 B@:33 W:?
Recv: echo:busy: processing
Recv: T:211.25 /215.00 B:60.00 /60.00 @:127 B@:33
Recv: T:211.91 /215.00 B:60.00 /60.00 @:127 B@:33 W:?
Recv: T:213.12 /215.00 B:60.01 /60.00 @:113 B@:29 W:?
Recv: echo:busy: processing
Recv: T:213.12 /215.00 B:60.00 /60.00 @:115 B@:33
Recv: T:213.79 /215.00 B:60.01 /60.00 @:107 B@:29 W:?
Recv: T:215.00 /215.00 B:60.00 /60.00 @:88 B@:33 W:9
Recv: echo:busy: processing
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:33
Recv: T:215.83 /215.00 B:60.00 /60.00 @:77 B@:33 W:8
Recv: T:216.67 /215.00 B:60.00 /60.00 @:64 B@:33 W:7
Recv: echo:busy: processing
Recv: T:216.67 /215.00 B:60.00 /60.00 @:66 B@:33
Recv: T:217.40 /215.00 B:60.00 /60.00 @:53 B@:33 W:6
Recv: T:217.50 /215.00 B:60.00 /60.00 @:57 B@:33 W:5
Recv: echo:busy: processing
Recv: T:217.50 /215.00 B:60.00 /60.00 @:58 B@:33
Recv: T:218.23 /215.00 B:60.00 /60.00 @:42 B@:33 W:9
Recv: T:218.28 /215.00 B:60.00 /60.00 @:43 B@:33 W:9
Recv: echo:busy: processing
Recv: T:218.33 /215.00 B:60.00 /60.00 @:42 B@:33
Recv: T:217.66 /215.00 B:60.00 /60.00 @:61 B@:33 W:9
Recv: T:217.50 /215.00 B:60.01 /60.00 @:63 B@:29 W:8
Recv: echo:busy: processing
Recv: T:217.50 /215.00 B:60.00 /60.00 @:63 B@:32
Recv: T:216.87 /215.00 B:60.00 /60.00 @:78 B@:32 W:7
Recv: T:216.67 /215.00 B:60.00 /60.00 @:80 B@:32 W:6
Recv: echo:busy: processing
Recv: T:216.67 /215.00 B:60.00 /60.00 @:79 B@:32
Recv: T:215.94 /215.00 B:59.99 /60.00 @:95 B@:37 W:5
Recv: T:215.83 /215.00 B:60.00 /60.00 @:93 B@:32 W:4
Recv: echo:busy: processing
Recv: T:215.83 /215.00 B:60.00 /60.00 @:92 B@:32
Recv: T:215.42 /215.00 B:60.00 /60.00 @:100 B@:32 W:3
Recv: T:215.00 /215.00 B:60.01 /60.00 @:107 B@:28 W:2
Recv: echo:busy: processing
Recv: T:215.00 /215.00 B:60.00 /60.00 @:107 B@:32
Recv: T:215.00 /215.00 B:60.00 /60.00 @:104 B@:32 W:1
Recv: T:215.00 /215.00 B:60.00 /60.00 @:101 B@:32 W:0
Recv: echo:busy: processing
Recv: T:215.00 /215.00 B:60.00 /60.00 @:101 B@:32
Recv: X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0
Recv: T:215.83 /215.00 B:60.00 /60.00 @:77 B@:32
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: T:215.89 /215.00 B:60.00 /60.00 @:75 B@:32
Recv: T:216.25 /215.00 B:60.00 /60.00 @:65 B@:32
Recv: echo:busy: processing
Recv: T:215.89 /215.00 B:60.00 /60.00 @:74 B@:31
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: T:215.78 /215.00 B:60.00 /60.00 @:73 B@:31
Recv: echo:busy: processing
Recv: T:215.05 /215.00 B:60.00 /60.00 @:88 B@:31
Recv: echo:busy: processing
Recv: T:215.00 /215.00 B:60.01 /60.00 @:86 B@:26
Recv: T:215.00 /215.00 B:60.00 /60.00 @:84 B@:30
Recv: echo:busy: processing
Recv: X:147.00 Y:115.00 Z:11.30 E:0.00 Count X:11760 Y:9200 Z:4520
Recv: SD printing byte 419/602130
Recv: ok P15 B0
Send: M27
Recv: ok P15 B0
Recv: ok P15 B0
Changing monitoring state from "Starting print from SD" to "Printing from SD"
Recv: echo:Bed Leveling ON
Recv: echo:Fade Height 2.00
Send: M27
Recv: T:215.00 /215.00 B:60.01 /60.00 @:83 B@:25
Recv: T:214.96 /215.00 B:60.00 /60.00 @:83 B@:29
Recv: echo:busy: processing
Recv: T:214.96 /215.00 B:60.00 /60.00 @:83 B@:29
Recv: echo:busy: processing
Recv: T:214.96 /215.00 B:60.00 /60.00 @:83 B@:29
Recv: T:214.96 /215.00 B:60.00 /60.00 @:83 B@:29
Recv: echo:busy: processing
Recv: T:214.96 /215.00 B:60.00 /60.00 @:83 B@:29
Recv: echo:busy: processing
Recv: T:214.49 /215.00 B:60.00 /60.00 @:94 B@:29
Recv: echo:busy: processing
Recv: T:214.41 /215.00 B:59.99 /60.00 @:96 B@:34
Recv: SD printing byte 800/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 859/602130
Recv: ok P0 B0
Recv: X:0.40 Y:20.00 Z:0.32 E:0.00 Count X:32 Y:7199 Z:119
Send: M27
Recv: X:5.00 Y:20.00 Z:0.32 E:0.00 Count X:32 Y:6398 Z:121
Recv: SD printing byte 886/602130
Recv: ok P0 B0
Recv: X:5.00 Y:20.00 Z:0.32 E:0.00 Count X:32 Y:6390 Z:121
Recv: SD printing byte 971/602130
Recv: ok P0 B0
Send: M27
Recv: T:214.41 /215.00 B:59.99 /60.00 @:96 B@:35
Recv: echo:busy: processing
Recv: T:214.84 /215.00 B:60.00 /60.00 @:87 B@:32
Recv: SD printing byte 1199/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 1318/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 1437/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:85 B@:32
Recv: SD printing byte 1972/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 3041/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:86 B@:33
Recv: SD printing byte 4107/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 5144/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:87 B@:33
Recv: SD printing byte 6212/602130
Recv: ok P0 B0
Send: M117 [ ] 1%
Recv: ok P0 B0
Send: M117 1% L=-/-
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 7301/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:87 B@:33
Recv: SD printing byte 8344/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 9384/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.01 /60.00 @:88 B@:29
Recv: SD printing byte 10420/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 11462/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:88 B@:33
Recv: SD printing byte 12508/602130
Recv: ok P0 B0
Send: M117 [ ] 2%
Recv: ok P0 B0
Send: M117 2% L=-/-
Recv: T:214.96 /215.00 B:60.03 /60.00 @:89 B@:20
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 13156/602130
Recv: ok P0 B0
Send: M27
Recv: T:214.73 /215.00 B:60.02 /60.00 @:95 B@:24
Recv: SD printing byte 13279/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 13403/602130
Recv: ok P0 B0
Send: M27
Recv: T:214.61 /215.00 B:60.01 /60.00 @:97 B@:27
Recv: SD printing byte 13526/602130
Recv: ok P0 B0
Send: M27
Recv: T:214.53 /215.00 B:60.00 /60.00 @:99 B@:30
Recv: SD printing byte 13650/602130
Recv: ok P1 B0
Send: M27
Recv: T:215.00 /215.00 B:60.01 /60.00 @:88 B@:26
Recv: SD printing byte 13832/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 13984/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:89 B@:29
Recv: SD printing byte 14108/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 14232/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 14354/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 14478/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 14602/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 14754/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 14876/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:59.99 /60.00 @:90 B@:33
Recv: SD printing byte 15000/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 15122/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 15246/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 15369/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 15492/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 15616/602130
Recv: ok P0 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 15740/602130
Recv: ok P1 B0
Send: M27
Recv: SD printing byte 15897/602130
Recv: ok P1 B0
Send: M27
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:29
Recv: SD printing byte 16056/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 16183/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 16309/602130
Recv: ok P0 B0
Recv: T:215.00 /215.00 B:60.01 /60.00 @:90 B@:24
Send: M27
Recv: SD printing byte 16700/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 17110/602130
Recv: ok P0 B0
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:28
Send: M27
Recv: SD printing byte 17422/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 18538/602130
Recv: ok P0 B0
Send: M117 [ ] 3%
Recv: ok P0 B0
Send: M117 3% L=-/-
Recv: ok P0 B0
Recv: T:214.92 /215.00 B:60.01 /60.00 @:92 B@:24
Send: M27
Recv: SD printing byte 21191/602130
Recv: ok P0 B0
Send: M27
Recv: SD printing byte 23769/602130
Recv: ok P0 B0
Recv: T:215.00 /215.00 B:60.00 /60.00 @:90 B@:28
Send: M27
Recv: SD printing byte 26251/602130
Recv: ok P0 B0
Recv: //action:cancel
Cancelling on request of the printer...
Changing monitoring state from "Printing from SD" to "Cancelling"
Send: M108
Recv: T:214.65 /0.00 B:60.00 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:214.37 /0.00 B:59.92 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:213.12 /0.00 B:59.79 /0.00 @:0 B@:0
Recv: X:0.00 Y:0.00 Z:5.00 E:0.00 Count X:0 Y:0 Z:2000
Recv: ok P15 B3
Send: M25
Recv: ok P15 B3
Recv: //action:paused
Printer signalled that it paused, switching state...
Send: M27
Recv: echo:Press button to resume
Recv: T:210.82 /0.00 B:59.60 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:208.12 /0.00 B:59.48 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:205.00 /0.00 B:59.27 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:201.67 /0.00 B:59.10 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:198.64 /0.00 B:58.95 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:195.45 /0.00 B:58.72 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:192.27 /0.00 B:58.54 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:188.75 /0.00 B:58.33 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:185.49 /0.00 B:58.13 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:182.12 /0.00 B:57.93 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:179.02 /0.00 B:57.79 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:176.17 /0.00 B:57.66 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:172.97 /0.00 B:57.47 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:170.06 /0.00 B:57.29 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:167.15 /0.00 B:57.11 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:164.44 /0.00 B:57.01 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:161.55 /0.00 B:56.88 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:158.85 /0.00 B:56.67 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:156.10 /0.00 B:56.55 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:153.68 /0.00 B:56.46 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:151.06 /0.00 B:56.25 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:148.71 /0.00 B:56.18 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: echo:Press button to heat nozzle
Recv: T:146.23 /0.00 B:56.04 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:143.95 /0.00 B:55.85 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:141.57 /0.00 B:55.79 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:139.35 /0.00 B:55.63 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:137.02 /0.00 B:55.53 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:134.86 /0.00 B:55.42 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:132.68 /0.00 B:55.26 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:130.68 /0.00 B:55.21 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:128.69 /0.00 B:55.03 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:126.56 /0.00 B:54.99 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:124.64 /0.00 B:54.80 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:122.63 /0.00 B:54.76 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:120.79 /0.00 B:54.56 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:118.82 /0.00 B:54.50 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:117.06 /0.00 B:54.32 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:115.15 /0.00 B:54.30 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:113.45 /0.00 B:54.09 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:111.64 /0.00 B:54.01 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:109.94 /0.00 B:53.96 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:108.21 /0.00 B:53.86 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:106.62 /0.00 B:53.74 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:104.94 /0.00 B:53.65 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:103.42 /0.00 B:53.58 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:101.83 /0.00 B:53.41 /0.00 @:0 B@:0
Recv: echo:busy: paused for user
Recv: T:100.39 /0.00 B:53.32 /0.00 @:0 B@:0
Recv: T:165.03 /215.00 B:60.05 /60.00 @:127 B@:33
Recv: echo:busy: paused for user
Recv: T:167.78 /215.00 B:60.00 /60.00 @:127 B@:47
Recv: echo:busy: paused for user
Recv: T:170.21 /215.00 B:60.01 /60.00 @:127 B@:41
Recv: echo:busy: paused for user
Recv: T:172.87 /215.00 B:60.02 /60.00 @:127 B@:35
Recv: echo:busy: paused for user
Recv: T:175.33 /215.00 B:60.00 /60.00 @:127 B@:42
Recv: echo:busy: paused for user
Recv: T:177.85 /215.00 B:60.01 /60.00 @:127 B@:37
Recv: echo:busy: paused for user
Recv: T:180.00 /215.00 B:60.00 /60.00 @:127 B@:40
Recv: echo:busy: paused for user
Recv: T:182.67 /215.00 B:60.00 /60.00 @:127 B@:39
Recv: echo:busy: paused for user
Recv: T:184.93 /215.00 B:60.00 /60.00 @:127 B@:38
Recv: echo:busy: paused for user
Recv: T:187.08 /215.00 B:60.00 /60.00 @:127 B@:38
Recv: echo:busy: paused for user
Recv: T:189.48 /215.00 B:60.01 /60.00 @:127 B@:34
Recv: echo:busy: paused for user
Recv: T:191.62 /215.00 B:60.00 /60.00 @:127 B@:37
Recv: echo:busy: paused for user
Recv: T:193.75 /215.00 B:60.00 /60.00 @:127 B@:37
Recv: echo:busy: paused for user
Recv: T:195.80 /215.00 B:60.00 /60.00 @:127 B@:37
Recv: echo:busy: paused for user
Recv: T:197.73 /215.00 B:60.00 /60.00 @:127 B@:36
Recv: echo:busy: paused for user
Recv: T:199.55 /215.00 B:60.00 /60.00 @:127 B@:36
Recv: echo:busy: paused for user
Recv: T:201.63 /215.00 B:60.00 /60.00 @:127 B@:36
Recv: echo:busy: paused for user
Recv: T:203.33 /215.00 B:60.00 /60.00 @:127 B@:36
Recv: echo:busy: paused for user
Recv: T:205.47 /215.00 B:60.01 /60.00 @:127 B@:31
Recv: echo:busy: paused for user
Recv: T:207.38 /215.00 B:60.00 /60.00 @:127 B@:35
Recv: echo:busy: paused for user
Recv: T:209.37 /215.00 B:60.00 /60.00 @:127 B@:34
Recv: echo:busy: paused for user
Recv: T:210.70 /215.00 B:60.00 /60.00 @:127 B@:34
Recv: echo:busy: paused for user
Recv: T:212.50 /215.00 B:60.00 /60.00 @:127 B@:34
Recv: echo:busy: paused for user
Recv: T:213.95 /215.00 B:60.00 /60.00 @:111 B@:34
Recv: echo:Press button to resume
Recv: echo:busy: paused for user
Recv: T:215.83 /215.00 B:60.00 /60.00 @:80 B@:33
Recv: echo:busy: paused for user
Recv: T:216.67 /215.00 B:60.00 /60.00 @:73 B@:33
Recv: echo:busy: paused for user
Recv: T:217.50 /215.00 B:60.00 /60.00 @:61 B@:33
Recv: echo:busy: paused for user
Recv: T:217.50 /215.00 B:60.00 /60.00 @:64 B@:32
Recv: echo:busy: paused for user
Recv: T:216.67 /215.00 B:60.00 /60.00 @:84 B@:32
Recv: echo:busy: processing
Recv: T:215.83 /215.00 B:60.00 /60.00 @:99 B@:32
Recv: //action:resumed
Printer signalled that it resumed, switching state...
Recv: ok P15 B2
Send: M27
Recv: Not SD printing
Recv: ok P15 B3
Recv: Not SD printing
Send: M27
Recv: ok P15 B3
Recv: Not SD printing
Send: M27
Recv: ok P15 B3
Recv: Not SD printing
Send: M108
Recv: ok P15 B3
Recv: ok P15 B3
Send: M108
Send: M26 S0
Recv: ok P15 B3
Send: M84
Recv: ok P15 B3
Send: M104 T0 S0
Recv: ok P15 B3
Send: M140 S0
Recv: ok P15 B3
Send: M106 S0
Recv: ok P15 B3
Changing monitoring state from "Cancelling" to "Operational"
Recv: ok P15 B3
Send: M84
Send: M104 T0 S0
Recv: ok P15 B3
Send: M140 S0
Recv: ok P15 B3
Recv: ok P15 B3
Send: M106 S0
Send: M84
Recv: ok P15 B3
Send: M104 T0 S0
Recv: ok P15 B3
Send: M140 S0
Recv: ok P15 B3
Send: M106 S0
Recv: ok P15 B3
Recv: ok P15 B3
Send: M27
Recv: Not SD printing
Recv: ok P15 B3
Recv: T:215.00 /0.00 B:59.99 /0.00 @:0 B@:0
Send: M27
Recv: Not SD printing
Recv: ok P15 B3

 

Octoprint

 

Send: N22 G1 X5 Y20 Z0.32 F5000.0*54
Recv: ok N22 P0 B3
Send: N23 G92 E0*118
Recv: X:5.00 Y:20.00 Z:0.32 E:0.00 Count X:32 Y:6385 Z:121
Recv: ok N23 P0 B3
Send: N24 G92 E0*113
Recv: X:5.00 Y:20.00 Z:0.32 E:0.00 Count X:32 Y:6355 Z:121
Recv: ok N24 P0 B3
Send: N25 G1 F2100 E-6*4
Recv: ok N25 P0 B3
Send: N26 M900 K0.000000 T0*47
Recv: ok N26 P0 B3
Send: N27 M107*16
Recv: ok N27 P0 B3
Send: N28 G1 F600 Z1.06*33
Recv: ok N28 P0 B3
Send: N29 M117 1% L=0/25*98
Recv: T:214.37 /215.00 B:60.00 /60.00 @:106 B@:34
Recv: ok N29 P0 B3
Send: N30 G0 F9000 X101.83 Y116.776 Z1.06*44
Recv: T:214.37 /215.00 B:60.00 /60.00 @:106 B@:34
Recv: echo:busy: processing
Recv: ok N30 P0 B3
Send: N31 G1 F600 Z0.56*45
Recv: ok N31 P0 B3
Send: N32 G1 F2100 E0*41
Recv: ok N32 P0 B3
Send: N33 G3 X107.813 Y102.004 I10.668 J-4.276 E2.45980 F900*22
Recv: T:214.41 /215.00 B:60.00 /60.00 @:106 B@:34
Recv: ok N33 P0 B3
Send: N34 M117 [ ] 2%*2
Recv: ok N34 P0 B3
Send: N35 M117 2% L=0/25*108
Recv: ok N35 P0 B3
Send: N36 G3 X122.840 Y107.480 I4.686 J10.497 E4.93066*104
Recv: ok N36 P0 B3
Send: N37 G3 X117.876 Y122.658 I-10.337 J5.019 E7.39679*64
Recv: T:215.00 /215.00 B:60.00 /60.00 @:93 B@:34
Recv: ok N37 P0 B3
Send: N38 G3 X102.533 Y118.224 I-5.378 J-10.152 E9.86359*100
Recv: T:215.57 /215.00 B:60.02 /60.00 @:81 B@:26
Recv: ok N38 P0 B3
Send: N39 G3 X101.829 Y116.775 I9.401 J-5.459 E10.08861*67
Recv: ok N39 P0 B3
Send: N40 G0 F9000 X101.278 Y117.012*122
Recv: ok N40 P0 B3
Send: N41 G3 X107.558 Y101.459 I11.221 J-4.512 E12.67735 F900*34
Recv: ok N41 P0 B3
Send: N42 G3 X123.385 Y107.227 I4.940 J11.040 E15.28020*91
Recv: T:215.83 /215.00 B:60.01 /60.00 @:77 B@:29
Recv: ok N42 P0 B3
Send: N43 G3 X118.165 Y123.183 I-10.882 J5.271 E17.87216*119
Recv: T:215.83 /215.00 B:60.01 /60.00 @:78 B@:28
Recv: ok N43 P0 B3
Send: N44 G3 X102.016 Y118.531 I-5.667 J-10.678 E20.46774*86
Recv: ok N44 P0 B3
Send: N45 G3 X101.278 Y117.012 I9.987 J-5.798 E20.70391*68
Recv: ok N45 P0 B3
Send: N46 G0 F9000 X101.89 Y116.766*69
Recv: ok N46 P0 B3
Send: N47 G0 X107.183 Y121.891*21
Recv: ok N47 P0 B3
Send: N48 G2 X109.198 Y122.775 I5.234 J-9.185 E21.07363 F900*23
Recv: ok N48 P0 B3
Send: N49 G1 X102.222 Y115.798 E22.72777*111
Recv: ok N49 P0 B3
Send: N50 G3 X101.856 Y114.302 I10.237 J-3.290 E22.98610*124
Recv: ok N50 P0 B3
Send: N51 M117 [ ] 3%*0
Recv: T:215.21 /215.00 B:60.00 /60.00 @:93 B@:31
Recv: ok N51 P0 B3
Send: N52 M117 3% L=0/25*108
Recv: ok N52 P0 B3
Send: N53 G1 X110.694 Y123.139 E25.08105*111
Recv: ok N53 P0 B3
Send: N54 G2 X111.743 Y123.265 I1.680 J-9.567 E25.25840*64
Recv: ok N54 P0 B3
Send: N55 G0 F9000 X111.744 Y123.267*114
Recv: ok N55 P1 B3
Send: N56 G1 F900 X111.964 Y123.278 E25.29534*55
Recv: ok N56 P0 B3
Send: N57 G1 X101.721 Y113.035 E27.7236*84
Recv: ok N57 P0 B3
Send: N58 G3 X101.722 Y111.906 I8.820 J-0.548 E27.91295*66
Recv: ok N58 P0 B3
Send: N59 G1 X113.092 Y123.274 E30.60805*111
Recv: ok N59 P0 B3
Send: N60 G1 X113.236 Y123.268 E30.63221*107
Recv: ok N60 P0 B3
Send: N61 G0 F9000 X113.236 Y123.267*119
Recv: ok N61 P1 B3
Send: N62 G2 X114.117 Y123.168 I-0.655 J-9.800 E30.78087 F900*49
Recv: ok N62 P0 B3
Send: N63 G1 X101.829 Y110.88 E33.69394*85
Recv: ok N63 P0 B3
Send: N64 G3 X102.013 Y109.933 I9.895 J1.441 E33.85575*102
Recv: T:215.00 /215.00 B:60.00 /60.00 @:95 B@:30
Recv: ok N64 P0 B3
Send: N65 G1 X115.064 Y122.984 E36.94958*110
Recv: ok N65 P0 B3
Send: N66 G2 X115.939 Y122.727 I-2.751 J-11.040 E37.10262*81
Recv: ok N66 P0 B3
Send: N67 G1 X102.269 Y109.057 E40.34355*103
Recv: T:215.00 /215.00 B:60.00 /60.00 @:93 B@:29
Recv: ok N67 P0 B3
Send: N68 G3 X102.581 Y108.237 I8.454 J2.761 E40.49057*105
Recv: ok N68 P0 B3
Send: N69 G1 X116.758 Y122.415 E43.85135*109
Recv: ok N69 P0 B3
Send: N70 G2 X117.525 Y122.049 I-2.942 J-7.171 E43.99378*106
Recv: ok N70 P0 B3
Send: N71 G1 X102.946 Y107.472 E47.44986*111
Recv: T:214.69 /215.00 B:60.00 /60.00 @:100 B@:29
Recv: ok N71 P0 B3
Send: N72 M117 [ ] 4%*6
Recv: ok N72 P0 B3
Send: N73 M117 4% L=0/25*104
Recv: ok N73 P0 B3
Send: N74 G3 X103.358 Y106.754 I9.874 J5.202 E47.58874*111
Recv: ok N74 P0 B3
Send: N75 G1 X118.243 Y121.637 E51.11711*110
Recv: T:214.73 /215.00 B:60.00 /60.00 @:98 B@:28
Recv: ok N75 P0 B3
Send: N76 G2 X118.915 Y121.177 I-5.192 J-8.322 E51.25356*98
Recv: ok N76 P0 B3
Send: N77 G1 X103.82 Y106.082 E54.8322*109
Recv: T:215.00 /215.00 B:60.00 /60.00 @:91 B@:28
Recv: ok N77 P0 B3
Send: N78 G3 X104.322 Y105.453 I8.806 J6.525 E54.96699*102
Recv: ok N78 P0 B3
Send: N79 G1 X119.545 Y120.676 E58.57574*108
Recv: T:215.00 /215.00 B:60.00 /60.00 @:92 B@:28
Recv: ok N79 P0 B3
Send: N80 G2 X120.132 Y120.132 I-6.161 J-7.236 E58.70994*100
Recv: ok N80 P0 B3
Send: N81 G1 X104.867 Y104.867 E62.32875*100
Recv: ok N81 P0 B3
Send: N82 G3 X105.453 Y104.322 I6.353 J6.254 E62.46305*111
Recv: ok N82 P0 B3
Send: N83 G1 X120.675 Y119.544 E66.07156*103
Recv: T:215.00 /215.00 B:60.00 /60.00 @:92 B@:27
Recv: ok N83 P0 B3
Send: N84 G2 X121.179 Y118.915 I-5.660 J-5.059 E66.20659*98
Recv: ok N84 P0 B3
Send: N85 G1 X106.083 Y103.82 E69.78534*89
Recv: T:215.00 /215.00 B:60.00 /60.00 @:93 B@:27
Recv: ok N85 P0 B3
Send: N86 G3 X106.754 Y103.361 I5.136 J6.798 E69.92179*96
Recv: ok N86 P0 B3
Send: N87 G1 X121.639 Y118.245 E73.45028*103
Recv: T:215.05 /215.00 B:60.00 /60.00 @:91 B@:27
Recv: ok N87 P0 B3
Send: N88 G3 X121.846 Y117.894 I1.403 J0.597 E73.51854*109
Recv: ok N88 P0 B3
Send: N89 G2 X122.051 Y117.525 I-5.822 J-3.459 E73.58921*102
Recv: ok N89 P0 B3
Send: N90 G1 X107.473 Y102.948 E77.04517*108
Recv: T:215.05 /215.00 B:60.00 /60.00 @:91 B@:27
Recv: ok N90 P0 B3
Send: N91 M117 [ ] 5%*10
Recv: ok N91 P0 B3
Send: N92 M117 5% L=0/25*102
Recv: ok N92 P0 B3
Send: N93 G3 X108.239 Y102.582 I4.547 J8.567 E77.18761*99
Recv: ok N93 P0 B3
Send: N94 G1 X122.417 Y116.76 E80.5485*111
Recv: T:215.21 /215.00 B:60.00 /60.00 @:88 B@:27
Recv: ok N94 P0 B3
Send: N95 G2 X122.730 Y115.941 I-9.111 J-3.955 E80.69535*100
Recv: ok N95 P0 B3
Send: N96 G1 X109.058 Y102.27 E83.93653*95
Recv: ok N96 P0 B3
Send: N97 G3 X109.936 Y102.016 I2.664 J7.566 E84.08982*110
Recv: ok N97 P0 B3
Send: N98 G1 X122.985 Y115.066 E87.18341*99
Recv: ok N98 P0 B3
Send: N99 G2 X123.170 Y114.118 I-9.496 J-2.346 E87.34520*102
Recv: T:215.31 /215.00 B:60.00 /60.00 @:86 B@:27
Recv: ok N99 P0 B3
Send: N100 G1 X110.88 Y101.829 E90.25876*103
Recv: ok N100 P0 B3
Send: N101 G3 X111.906 Y101.724 I1.422 J8.838 E90.43173*89
Recv: ok N101 P0 B3
Send: N102 G1 X123.276 Y113.093 E93.12706*83
Recv: T:215.16 /215.00 B:60.00 /60.00 @:89 B@:27
Recv: ok N102 P0 B3
Send: N103 G2 X123.278 Y111.965 I-10.249 J-0.591 E93.31623*106
Recv: ok N103 P0 B3
Send: N104 G1 X113.034 Y101.72 E95.74497*99
Recv: ok N104 P0 B3
Send: N105 G3 X114.301 Y101.855 I-0.420 J9.890 E95.95870*117
Recv: ok N105 P0 B3
Send: N106 G1 X123.142 Y110.697 E98.05461*93
Recv: T:215.00 /215.00 B:60.00 /60.00 @:92 B@:27
Recv: ok N106 P0 B3
Send: N107 G2 X123.057 Y110.246 I-6.306 J0.958 E98.13139*116
Changing monitoring state from "Printing" to "Cancelling"
Recv: ok N107 P0 B3
Send: N108 M108*35
Recv: ok N108 P0 B3
Send: N109 M84*23
Recv: T:215.00 /215.00 B:60.00 /60.00 @:91 B@:27
Recv: echo:busy: processing
Recv: T:215.00 /215.00 B:60.00 /60.00 @:91 B@:27
Recv: echo:busy: processing
Recv: ok N109 P15 B3
Send: N110 M104 T0 S0*33
Recv: ok N110 P15 B3
Send: N111 M140 S0*100
Recv: ok N111 P15 B3
Send: N112 M106 S0*101
Recv: ok N112 P15 B3
Changing monitoring state from "Cancelling" to "Operational"
Recv: ok N109 P15 B4
Recv: X:123.06 Y:110.25 Z:0.56 E:0.00 Count X:9845 Y:8820 Z:231
Recv: ok N109 P15 B4
Recv: echo: cold extrusion prevented
Recv: ok N109 P15 B4

 

 

Reply
1 Reply
Marlin Firmware Service
Posts: 163
(@marlin-firmware-service)
Stepper Motor
Joined: 3 months ago

Sorry - not quite sure what the issue is here - and the logs don't really help.

If you've enabled the filament runout sensor via M412 S1 D9 in your slicers G-Code, then the printer will consider an error condition after 9mm of filament is used but it fails to trigger a pulse from the sensor.

This should then trigger the M600 command as a filament change.

The down side is that the Ender 3 V2 screen specifically doesn't support displaying anything for this command - however a button press should resume printing afterwards. You may have to purge manually before resuming (due to no screen support).

Does this help?

Reply
Scroll Up