@madean Carbon fiber-filled filaments have the same requirements as the base filament it is infused with. The hardware requirements for carbon fiber-filled PLA filament are the same as PLA’s.

Nozzles with larger diameters (0.5mm or more) are far less likely to clog, as the fibers will fit through the larger nozzle hole much more easily. And try increasing the first layer height as if the nozzle is too close to the bed, this will create increased back-pressure while printing these layers that can cause the fibers to build up and clog the nozzle temporarily.

First, you need to test this process and check how much time it takes to print using carbon fiber. The use of carbon fibers is more in 3d printing and how to write a good essay fast will help you to learn much more about these printing mechanisms.