Forum

 

Notifications
Clear all

bed won't zero to top, new Ender 5 plus build

Page 2 / 2

dbrinas
(@dbrinas)
New Member Registered
Joined: 7 months ago
Posts: 3
 

I just bought a new machine. Having the same issues here. I have the latest firmware 1.70.2 . has there been a fix for this.


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 10 months ago
Posts: 1045
 

@dbrinas Don't have an exact answer but you can make a video here, maybe your problem could be solved.


ReplyQuote
hantuuk
(@hantuuk)
Eminent Member Registered
Joined: 10 months ago
Posts: 37
 

@dbrinas Hi, not sure is this will help. I have an Ender 5 pro with a V4.2.7 board and I installed BL touch V3.1. I used this youtube video to set my z offset. The thing is this procedure requires the printer to be connected to a PC using repetier host or Octoprint running on a Raspberry Pi.

 

Creality Ender 5 Pro


ReplyQuote
Jets
 Jets
(@jets)
New Member Registered
Joined: 6 months ago
Posts: 2
 

Does someone know a resolution to this problem?

 

I have just set up my ender 5 plus only to find this problem with my Printer too.

 


ReplyQuote
Jets
 Jets
(@jets)
New Member Registered
Joined: 6 months ago
Posts: 2
 
I have it working now. 

 
the set screw for allen key in the top of BL touch
Its adjustable to increase or decrease the friction of the probe which
Comes out the bottom. 
It appears mine was too tight, to fall out the bottom of BL touch when it was commanded to. 
I changed this by rotating the set screw in the top of BL touch clockwise (tighten) 
And the probe become more movable when commanded to. 
 
I need to complete all my remaining checks before test printing. 
 
 
This post was modified 6 months ago by Jets

kevin liked
ReplyQuote
Page 2 / 2