Forum

 

Notifications
Clear all

Ender 3 V2 Printing Like a Sponge


Mirrordivis
(@mirrordivis)
New Member Registered
Joined: 2 months ago
Posts: 2
Topic starter  

Hello all!

Today’s print ended up extremely, thin, porous, and chaotically extruded. See the attached images (first is the sponge failure print, second is print pieces that were successful using the same filament, Cura settings, and extruder and bed temp settings).

I am new to repairing my machine as this is my first 3D printer.

Is this a fan/extruder/programming related issue?


ReplyQuote
Mirrordivis
(@mirrordivis)
New Member Registered
Joined: 2 months ago
Posts: 2
Topic starter  

Apologies, the attached is the Failed sponge print


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 7 months ago
Posts: 1045
 

@mirrordivis It is an extruder issue. Check if your extruder gear and guide rail work well when printing. It is under-extrusion for sure, so you need to find out it was caused by the extruder or the hotend clog.


ReplyQuote