Notifications
Clear all
Topic starter
23/03/2022 6:01 am
I’m having an issue with rough layers going one direction with the fan is at 100% , on the first layer is perfect, smooth as can be.
See attached picture
The top box is layer 1
The second box has two layers , this is the worst?
The third has 3 layers
And the bottom box has 4 layers, this is in the same direction as the second???
The material I’m using is a PLA, fan is at 100%
Any help would be appriciated.
This topic was modified 11 months ago by robstermn
Topic starter
23/03/2022 8:58 pm
Did another test today and it looks like the rough layers are happening in both directions, see attached. Fan is at 100%
Topic starter
23/03/2022 9:38 pm
Did the same test with the part cooling fan off and results are better???
Why?
See attached