Forum

 

Notifications
Clear all

Homing Y axis


PenstonA
(@penstona)
Active Member Registered
Joined: 2 years ago
Posts: 6
Topic starter  

Have ender 3 with an SKR E35 Turbo board.

Been working fine but suddenly the axis will no home. I can move the bed back and forward ok. Checked the connector on board and the printer all is OK. tried G28 but still does not move.

checked marlin configaration_h

tried 

#define Y_MIN_POS  0 and 350
#define INVERT_Y_DIR true and False

can anybody help

 

 


ReplyQuote
Topic Tags