Forum


 

ENDER 3 PRO v4.2.7 …
 
Notifications
Clear all

ENDER 3 PRO v4.2.7 + TOUCH SCREEN + BL TOUCH DOES NOT BOOT

8 Posts
4 Users
0 Likes
506 Views
polo0177
(@polo0177)
New Member
Joined: 2 years ago
Posts: 1
Topic starter  

hi everyone, 

i added a V4.2.7 mainboard and the creality touch screen for ender 3 pro and a BL touch on my ENDER 3 PRO but when i turn it on, it doesn’t work. The screen is blocked on loading.

But when i use it with the original screen it works very well.

Can somebody help me?


   
ReplyQuote
kevin
(@kevin)
Noble Member
Joined: 2 years ago
Posts: 1045
 

@polo0177 Any new parts added to your printer require the correct firmware to drive. I did not see you flash the firmware for your printer and also your touch screen. 


   
ReplyQuote
aceplt
(@aceplt)
Active Member
Joined: 8 months ago
Posts: 5
 

I am having the same issue. i recently purchased a ender 3 touchscreen and when I went to flash the printer with the touchscreen fw and  turned on the printer. The touchscreen it frozen on the Creality screen nothing loads. I tried  copying the DWN_SET folder to a micro card and hook it back up I get a blue screen with all zeros and says complete. I took screen shots. Need to help!! I think it wasn’t flashed at the factory. 


   
ReplyQuote
aceplt
(@aceplt)
Active Member
Joined: 8 months ago
Posts: 5
 

I am having the same issue. i recently purchased a ender 3 touchscreen and when I went to flash the printer with the touchscreen fw and  turned on the printer. The touchscreen it frozen on the Creality screen nothing loads. I tried  copying the DWN_SET folder to a micro card and hook it back up I get a blue screen with all zeros and says complete. I took screen shots. Need to help!! I think it wasn’t flashed at the factory. 


   
ReplyQuote
aceplt
(@aceplt)
Active Member
Joined: 8 months ago
Posts: 5
 

I am having the same issue. i recently purchased a ender 3 touchscreen and when I went to flash the printer with the touchscreen fw and  turned on the printer. The touchscreen it frozen on the Creality screen nothing loads. I tried  copying the DWN_SET folder to a micro card and hook it back up I get a blue screen with all zeros and says complete. I took screen shots. Need to help!! I think it wasn’t flashed at the factory. 


   
ReplyQuote
aceplt
(@aceplt)
Active Member
Joined: 8 months ago
Posts: 5
 

I am having the same issue. i recently purchased a ender 3 touchscreen and when I went to flash the printer with the touchscreen fw and  turned on the printer. The touchscreen it frozen on the Creality screen nothing loads. I tried  copying the DWN_SET folder to a micro card and hook it back up I get a blue screen with all zeros and says complete. I took screen shots. Need to help!! I think it wasn’t flashed at the factory. 


   
ReplyQuote
aceplt
(@aceplt)
Active Member
Joined: 8 months ago
Posts: 5
 

I am having the same issue. i recently purchased a ender 3 touchscreen and when I went to flash the printer with the touchscreen fw and  turned on the printer. The touchscreen it frozen on the Creality screen nothing loads. I tried  copying the DWN_SET folder to a micro card and hook it back up I get a blue screen with all zeros and says complete. I took screen shots. Need to help!! I think it wasn’t flashed at the factory. 


   
ReplyQuote
WORCrealityHelp
(@wor000)
Active Member
Joined: 12 months ago
Posts: 9

   
ReplyQuote