Forum

 

Notifications
Clear all

CR30 Printmill


Tref
 Tref
(@tref)
New Member Registered
Joined: 4 months ago
Posts: 2
Topic starter  

Any other users of the CR30 Printmill here? Is there a better community for it anywhere?

Interested in hearing experiences and what people have learned?

Tref.


ReplyQuote
kevin
(@kevin)
Noble Member Registered
Joined: 9 months ago
Posts: 1045
 

@tref  https://forums.creality3dofficial.com/first-review-for-cr-30-printmill/ Here are my experiences of using CR-30. To be honest, it is useful for specific printing needs. But for most of the prints, there is not much difference with the vertical printers. By the way, I do not like the diagonal layer.


ReplyQuote
Tref
 Tref
(@tref)
New Member Registered
Joined: 4 months ago
Posts: 2
Topic starter  

@kevin 

Many thanks for that - I have now just started to get the one at my company to work... The first observation, with my first print of PETG, is that the belt possibly allows the print to warp whilst maintaining adhesion, as the belt warps with the print! An interesting way of maintaining adhesion perhaps!

There will be a new learning curve in designing for the overhangs which appear to be possible too...

Tref.


ReplyQuote