ABS Poor Layer Adhesion, Separation & Delamination | Guide
Author: MartinBesides many test devices, Martin now has his fourth own 3D printer running and prints as a hobby for friends, family and himself. He is happy to share his experience with each new article. ABS is a very difficult filament to print. If you’re used to the relatively easy-to-print PLA filament, you’ll have to make some adjustments […]
3D Printing Nerd Fixed the Ender 7
Hello guys! Welcome back to Kevin’s Blog. Last week, I have mentioned the 3D Printing Nerd channel in blog <<Ender 7 The real high-speed FDM printer>>. The interesting thing is that there is no successful print at the end of the live stream. That was a sad story. However, this morning, I saw Joel post a […]
3D Printer Screen Issues
Sometimes we got issues with the screen and we can not control the test when the screen got something wrong. So the screen issue is kind of a tricky thing. In this article, I will show you some tips on how to check your printer when the screen failed.
Install the Laser kit on Ender3 V2
Background In the previous post about Creality Laser Kit, I did a basic introduction of laser head used on a 3D printer. The Creality Laser Kit uses magnets to attach the laser head to a metal nozzle cover. But this method will not work on a 3D printer that has a plastic nozzle cover, like […]
Save Large Print from Airprinting
air-printing would be the most frustrating one of all the issues. In this article, I will provide an effective solution to this issue.
Practical Tips for Cura Settings—– Overview
For FDM 3D printer users, slicing models into Gcode is a necessary and important step in 3D printing. Well-considered slicing settings can help us reduce printing time, save material, and most importantly, increase the chance of successful printing. In other words, we need to set up some parameters in slicing software to get the desired […]